Ruijie RG-S2600G-I Series - Page 864

CLI Reference NFPP Configuration Commands
trusted addresses are not allowed.
Examples
Ruijie(config)# nfpp
Ruijie(config-nfpp)# define tcp
Ruijie(config-nfpp-define)#trusted-host 1.1.1.1 255.255.255.255
Related
commands
Command
Description
sho
w
nfpp
defin
e
trust
ed-h
ost
Show the trusted host
configurations.
global-policy
Use this command to set the rate-limit threshold and attack threshold based on the host or port.
global-policy {per-src-mac | per-src-ip | per-port} rate-limit-pps attack-threshold-pps
Parameter
description
Parameter
Description
per-src-ip
Perform the rate statistics based on
the source IP / VID and port.
per-src-mac
Perform the rate statistics based on
the source MAC / VID and port.
per-port
Perform the rate statistics based on
each physical port of receiving the
packets.
rate-limit-pps
Set the rate-limit threshold.
attack-threshold-pps
Set the attack threshold.
Default
Settings
N/A.
Command
mode
NFPP define configuration mode.
Usage
guidelines
To create a user-defined anti-attack type, the classification
rule for the rate statistics must be specified, that is,