Ruijie RG-S2600G-I Series - Page 876

CLI Reference NFPP Configuration Commands
The following example shows the NFPP log buffer area:
Ruijie#show nfpp log buffer
Protocol VLAN Interface IP address MAC address Reason
Timestamp
------- ---- -------- --------- ----------- ------
---------
ARP 1 Gi0/1 1.1.1.1 - DoS 2009-0
5-30 16:23:10
ARP 1 Gi0/1 1.1.1.1 - ISOLATED 2009-0
5-30 16:23:10
ARP 1 Gi0/1 1.1.1.2 - DoS 2009-
05-30 16:23:15
ARP 1 Gi0/1 1.1.1.2 - ISOLATE_FAILED 2009-
05-30 16:23:15
ARP 1 Gi0/1 - 0000.0000.0001 SCAN
2009-05-30 16:30:10
ARP - Gi0/2 - - PORT_ATTACKED 2009
-05-30 16:30:10
Field
Description
Protocol
ARP, IP, ICMP, DHCP
DHCPv6, NS-NA, RS,
RA-REDIRECT
Reason
1. DoS
2. ISOLATED
3. ISOLATE_FAILE
4. SCAN
5. PORT_ATTACKED
Related
commands
Command
Description
clear nfpp log
Clear the NFPP log buffer area.
show nfpp arp-guard hosts
Use this command to show the monitored host.
show nfpp arp-guard hosts [statistics | [[vlan vid] [interface interface-id] [ip-address |
mac-address]]]