Ruijie RG-S2600G-I Series - Page 880

CLI Reference NFPP Configuration Commands
Maximum count of monitored hosts: 1000
Monitor period:300s
Field
Description
Interface(Global)
Global configuration
Status
Enable/Disable the anti-attack
function.
Rate-limit
In the format of the rate-limit
threshold for the source IP address/
the rate-limit threshold for the
source MAC address/ the rate-limit
threshold for the port
Attack-threshold
In the same format as the rate-limit.
-
No configuration.
Related
commands
Command
Description
arp-guard
attack-threshold
Set the global attack threshold.
arp-guard enable
Enable the anti-ARP attack
function.
arp-guard
isolate-period
Set the global isolate time.
arp-guard
monitor-period
Set the monitor period.
arp-guard
monitored-host-li
mit
Set the maximum number of the
monitored hosts.
arp-guard
rate-limit
Set the global rate-limit threshold.
arp-guard
scan-threshold
Set the global scan threshold.
nfpp arp-guard
enable
Enable the anti-ARP attack
function on the interface.
nfpp arp-guard
isolate-period
Set the isolate time.
nfpp arp-guard
policy
Set the rate-limit threshold and
attack threshold.