CLI Reference NFPP Configuration Commands
Enable/Disable the anti-attack
function.
In the format of the rate-limit
threshold for the
NS-NA/RS/RA-REDIRECT.
In the same format as the rate-limit.
nd-guard
attack-threshold
Set the global attack threshold.
Enable the ND anti-attack
function.
Set the global rate-limit threshold.
Enable the ND anti-attack
function on the interface.
Set the rate-limit threshold and
attack threshold.
show nfpp define hosts
Use this command to show the monitored hosts
show nfpp define hosts name [statistics | [[vlan vid] [interface interface-id] [ip-address]]]
Name of the user-defined anti-attack
type.
Show the statistics of monitored
hosts.
To Next Page
Loading...
