Ruijie RG-S2600G-I Series - Page 895

CLI Reference NFPP Configuration Commands
Command
mode
Privileged EXEC mode.
Usage
guidelines
This command allows filtering the hosts with parameters
specified.
Examples
Ruijie#show nfpp define hosts tcp statistics
Define tcp:
success fail total
------- ---- -----
100 20 120
The command execution as shown below means that there are 120
hosts monitored totally, wherein 100 hosts are isolated successfully,
and 20 hosts fails.
Ruijie#show nfpp define hosts tcp
Define tcp:
If column 1 shows '*', it means "hardware do not isolate host" .
VLAN interface IP address MAC address remain-time(s)
---- -------- --------- -------------
----------------
1 Gi0/1 1.1.1.1 - 110
2 Gi0/2 1.1.2.1 - 61
Total:2 host(s)
Related
commands
Command
Description
clear nfpp define
hosts
Clear the monitored hosts of
user-defined anti-attack type.
show nfpp define summary
Use this command to show the configurations
show nfpp define summary [name]
Parameter
description
Parameter
Description
name
Name of the user-defined anti-attack
type.