Ruijie RG-S2600G-I Series - Page 896

CLI Reference NFPP Configuration Commands
Default
Settings
N/A.
Command
mode
Privileged EXEC mode.
Usage
guidelines
This command can be used to show the configurations.
Without the name specified, all user-defined anti-attack
types will be shown.
Examples
Ruijie# show nfpp define summary tcp
Define tcp summary:
match etype 0x0800 protocol 0x06
Maximum count of monitored hosts: 1000
Monitor period:300s
Format of column Rate-limit and Attack-threshold is per-src-ip
/per-src-mac/per-port.
Interface Status Isolate-period Rate-limit Attack-threshold
Global Enable 300 -/5/150 -/10/300
G 0/1 Enable 180 -/6/- -/8/-
G 0/2 Disable 200 -/5/30 -/10/50
Field
Description
Interface
If the interface field is shown as
Global, it means that is configured
in the global configuration mode.
Status
Enable/ Disable the anti-attack
function.
Related
commands
Command
Description
match
Clear the monitored hosts of
user-defined anti-attack type.
policy
Attack threshold and rate-limit
threshold.
isolate-period
Isolate time
monitored-period
Monitored time
monitored-host-li
mit
Maximum monitored host number