CLI Reference Guide QoS Configuration Commands
Restore to the default value.
See default configuration.
Global configuration mode.
Ruijie(config)#priority-queue cos-map 1 0 1
wrr-queue bandwidth
Use this command to set the weight ratio for the WRR algorithm. Use the no form of the command to restore it to
the default.
wrr-queue bandwidth weight1 ... weightn
no war-queue bandwidth
Weight value specified for the output
queues. For the number of weights
and its range, see the default settings.
Restore to the default value.
weight1: ...: weightn = 1:..:1
Global configuration mode
Ruijie(config)# wrr-queue bandwidth 1 2 3 4 5 6 7 8
To Next Page
Loading...
