Ruijie RG-S2600G-I Series - Page 956

CLI Reference Guide QoS Configuration Commands
Default
configuration
See the default configuration.
Command
mode
Global configuration mode.
Examples
Ruijie(config)# mls qos map dscp-cos 8 10 16 18 to 0
Related
commands
Command
Description
show mls qos
maps
Show DSCP-COS, COS-DSCP and
IP-prec-DSCP maps.
interface rate-limit
Use this command to configure rate limitation on the interface. Use the no form of the command to restore it to
the default.
rate-limit {input | output} bps burst-size
no rate-limit
Parameter
description
Parameter
Description
input
Specify the input speed limit.
output
Specify the output speed limit.
bps
Bandwidth limitation per second
burst-size
Burst traffic limit (Kbyte). Its range
varies with products.
no
Restore to the default value.
Command
mode
Interface configuration mode.
Examples
Ruijie(config)# interface fastEthernet 0/1
Ruijie(config-if)# rate-limit input 1000000 4096
Related
commands
show mls qos interface.