CLI Reference Guide QoS Configuration Commands
mls qos scheduler
Use this command to configure the queue scheduling algorithm. Use the no form of the command to restore it to
the default.
mls qos scheduler [sp | rr | wrr | drr]
no mls qos scheduler
Absolute priority scheduling
Frame count weighted round-robin
scheduling
Frame length weighted round-robin
scheduling
Restore to the default value.
The queue scheduling algorithm is wrr by default.
Global configuration mode.
Ruijie(config)# mls qos scheduler sp
drr-queue bandwidth
Use this command to set the queue weight in the DRR scheduling mode. Use the no form of the command to
restore it to the default.
drr-queue bandwidth weight1...weight8
no drr-queue bandwidth
Queue weight. For the value range,
see the default configuration.
Restore to the default value.
To Next Page
Loading...
Need help?
General