CLI Reference Guide QoS Configuration Commands
See the default configuration.
Global configuration mode.
Ruijie(config)# drr-queue bandwidth 1 2 3 4 5 6 7 8
mls qos map ip-prec-dscp
Use this command to map the IP-precedence to the DSCP value. Use the no form of this command to disable the
mapping.
mls qos map ip-prec-dscp dscp1...dscp8
no mls qos map ip-prec-dscp
Restore to the default value.
See the default configuration.
Global configuration mode.
Ruijie(config)# mls qo map ip-prec -dscp 8 10 16 18 24 26 32 34
Show the DSCP-COS, COS-DSCP and
IP-prec-DSCP maps.
wfq-queue bandwidth
Use this command to configure the corresponding queue on the condition that the queue uses wfq schedule
To Next Page
Loading...
Need help?
General