Ruijie RG-S2600G-I Series - Page 972

CLI Reference CFM Configuration Commands
Default
N/A.
Command
mode
Configuration mode.
Usage
guidelines
N/A.
Examples
Ruijie# cfm mip-rule explicit service-instance 1
Related
commands
Command
Description
show cfm mp
Show the maintenance point
information.
cfm cc interval service-instance
Use this command to set interval of transmitting CCM. The no form of this command can be used to restore the
interval to the default value.
cfm cc interval interval-type service-instance instance-id
no cfm cc interval service-instance instance-id
Parameter
description
Parameter
Description
interval-type
Configure CCM transmit interval
type for the specified service
instance. The parameter of
"interval-type" shall range between
4-7. CCM transmit intervals
represented by various interval types
are shown below:
Interval-type CCM transmit
interval
4 1s
5 10s
6 60s
7 600s
instance-id
Service instance id, in the range of
1-32767.
no
Restore the interval type to the
default value.
Default
The default value of interval-type is 4.