Ruijie RG-S2600G-I Series User Manual

CLI Reference CFM Configuration Commands
Default
N/A.
Command
mode
Interface configuration mode.
Usage
guidelines
N/A
Examples
Ruijie(config)# interface gigabitethernet 1/1
Ruijie(config-if)# cfm mep 100 service-instance 1 inward
Related
commands
Command
Description
show cfm mep
service-instance
Show the MEP(maintenance
association end point) information.
show cfm mp
Show the maintenance point
information.
cfm mip-rule service-instance
Use this command to set the rule of generating the maintenance domain intermediate point.The no form of this
command can be used to delete the rule of generating the maintenance domain intermediate point.
cfm mip-rule {explicit | default} service-instance instance-id
no cfm mip-rule service-instance instance-id
Parameter
description
Parameter
Description
explicit
On condition that there is no MIP
in the low-level MD, the MEP in
the low-level MD determines
whether to create the MIP. If
there is a MEP in the low-level
MD, then this level will generate a
MIP, or else, the MIP will not be
created.
default
The MIP generates if there is no
MIP in the low-level MD.
instance-id
Service instance id, in the range
of 1-32767.
no
Delete the MIP generating rule
and the generated MIP.

Ruijie RG-S2600G-I Series Specifications

General

Brand	Ruijie
Model	RG-S2600G-I Series
Category	Switch
Language	English