Ruijie RG-S2600G-I Series - Page 970

CLI Reference CFM Configuration Commands
no
This option means deleting the
specified maintenance
association end point. When
deleting, the configuration of
the local maintenance
association end points which
are based on this MEP list will
be removed.
Default
N/A.
Command
mode
Configuration mode.
Usage
guidelines
N/A.
Examples
Ruijie(config)# cfm mep-list 1-3 service-instance 1
Related
commands
Command
Description
show cfm mep-list
service-instance
Show the MEP(maintenance
association end point) list
information.
cfm mep service-instance
Use this command to set the MEP(maintenance association end point). The no form of this command can be used
to delete the MEP(mintenance association end point).
cfm mep mep-id service-instance instance-id {inward | outward}
no cfm mep mep-id service-instance instance-id
Parameter
description
Parameter
Description
mep-id
MEP (maintenance association
end point) id, in the range of
1-8191.
instance-id
Service instance id, in the range
of 1-32767.
inward
Set the inward MEP.
outward
Set the outward MEP.
no
Delete the specified MEP.