CLI Reference CFM Configuration Commands
show cfm remote-mep service-instance mep
Use this command to show the remote MEP(maintenance association end point) information.
show cfm remote-mep service-instance instance-id mep mep-id
Service instance id, in the range of
1-32767.
MEP (maintenance association end
point) id, in the range of 1-8191.
Ruijie# show cfm remote-mep service-instance 1 mep 100
show cfm service-instance
Use this command to show the service instance configurations.
show cfm service-instance [instance-id]
Service instance id, in the range of
1-32767.
By default, all service instances are shown.
Ruijie# show cfm service-instance 1
To Next Page
Loading...
Need help?
General