Ruijie RG-S2600G-I Series - Page 983

CLI Reference CFM Configuration Commands
show cfm linktrace-info auto-detection size
Use this command to show the auto-detected linktrace information.
show cfm linktrace-info auto-detection [size entries_count]
Parameter
description
Parameter
Description
entries_count
Entry count, in the range of 1-100.
Default
By default, all auto-detected linktrace information is shown.
Command
mode
Privileged EXEC mode.
Usage
guidelines
N/A.
Examples
The example below shows all the auto-detected linktrace information.
Ruijie# show cfm linktrace-info auto-detection
The example below shows the linktrace information auto-detected for 10
times.
Ruijie# show cfm linktrace-info auto-detection size 10
Related
commands
Command
Description
cfm linktrace
auto-detection
size
Set the linktrace auto-detection
function.