140
[Notes]
• With the highlighting function the character width enlarges proportional with the expansion
factor.
• Using the highlighting function, depending on the type of font, characters become squeezed.
• This command is not available for JIS code print data.
• For the half size character (1-byte character code), printing will be performed in W11 x H22
dots.
• For the full size character (2-byte character code), printing will be performed in W22 x H22 dots.
• When the Kanji mode setting is [Japan, Compatible Kanji] or [China, Simplified Chinese
(GB18030)] or [China, Traditional Chinese (BIG5)] or [Korean (KSX1001)], it will be a command
error.
[Valid Commands]
Print position <V> <H>
Modification
<P>
<L>
<%>
<&>
</>
<0>
<WD>
Parent topic Font command
To Next Page
Loading...
