158
[Notes]
• With the highlighting function, the character width enlarges proportional with the expansion
factor.
• Using the highlighting function, depending on the type of font, characters become squeezed.
• This command is not available for JIS code print data.
• For the half size character specification (1-byte character code), printing will be performed in
W12 x H24 dots.
• For the full size character specification (2-byte character code), printing will be performed in
W24 x H24 dots.
[Attention]
• When half-sized character with voiced/P-sound consonant mark is specified, each part of
character appears as a single character.
e.g.) When the word
"ﾊﾞｰ"
is specified, it will be written separately such as "
ﾊ
", "
ﾞ
", "
ï½°
".
[Valid Commands]
Print position <V> <H>
Modification
<P>
<L>
<%>
<&>
</>
<0>
<WD>
Parent topic Font command
To Next Page
Loading...
