SATO CL6NX - Page 179

177
(2) Specification of <D> (No HRI, Guard bar available)
If specifying <D>, following barcode will be printed.
Guard bar
Label feed direction
[Note]
• HRI is printable specifying <Character Type> data subsequently to <D>.
• For more information, refer to Barcode Specification (Selection of HRI) <D>~<d>.
(3) Specification of <BD> (HRI and guard bar available)
If specifying <BD>, following barcode will be printed.
HRI(JAN/EAN 13)
HRI(JAN/EAN 8)
HRI(UPC-A)
Label feed direction
Label feed direction
Label feed direction
(4) Specification of <BM> (HRI available, setting the character barcode height of the first and
the last digit to the same height of the guard bar)
If specifying <BM>, following barcode will be printed.
HRI(UPC-A)
Label feed direction
(5) Specification of <BL> (No HRI, setting the character barcode height of the first and the last
digit to the same height of the guard bar)
If specifying <BL>, following barcode will be printed.
Label feed direction
[Barcode Specification Only]
Barcode specification parameter Barcode specification <B>
C CODE93 Barcode only
E UPC-E Barcode only
G CODE128 Barcode only