205
[Supplementary Explanation]
• UCC128 code is exclusive to Standard Carton ID. When printing in EAN128, designed for the
markets in the medical, fresh food, or flowers and plants, use CODE128 Barcode <BG> to
specify print data with application identification or separator that matches each specification.
• Start character code, function character, end character code, and identification code
(corresponds to [00] only) are added automatically.
• Modulus 10 check character and modulus 103 check character are automatically generated.
• Sequential number of barcode data is available.
• Line pitch between barcode and expository font is fixed at 10 dots.
• If the width of expository font is wider than that of barcode, it starts printing from the print start
position of barcode.
• If the width of expository font is narrower than that of barcode, expository font will be aligned to
the center of barcode for printing.
• Prints expository font in OCR-B.
• If expository font is outside of printing area, it will not be printed. When selecting [HRI is
available], specify Vertical Print Position <V> and Horizontal Print Position <H> in consideration
of print of expository font.
• If the bar code commentary font specification to specify other than 0, 1, 2, operation is the same
as the bar code commentary font specified 0.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
