SATO CL6NX Programming Reference

212
◦ To specify the print of composite symbol, delimit one-dimensional data and two-dimensional
data with ‘|’ (7Ch).
Data = One-dimensional data | Two-dimensional data
◦ Data of GS1 DataBar Composite (CC-A/CC-B) are needed to be specified between the 1st
and 16th digit of GS1 DataBar Expanded Composite (CC-A/CC-B) data.
◦ GS1 DataBar Expanded Composite (CC-A/CC-B) can contain GS1 DataBar Composite
(CC-A/CC-B) data and 74 digits of numeric character and 41 digits of alphabet.
(When numeric characters and alphabets are mixed, GS1 DataBar Composite (CC-A/CC-
B) data and 41 digit characters can be specified.)
Ex 1) AI(01)+Product ID code 4912345000019+AI(15)+ Best before date is set at 30/
Nov.2012:
(01)04912345000019(15)121130
Ex 2) AI(01)+Product ID code 4912345000019+AI(17)+Expiration date is set at 31/
Jan.2013+AI(10)+lot # ABC123:
(01)04912345000019(17)20130131(10)ABC123
◦ When specified data do not reach the maximum digits, blank is filled by zero.
◦ 2D data can contain up to 338 digits, but it varies by the type of Barcode.
◦ Barcode may stick out of the label depending on data and the number of digit, and scanner
cannot read it. Adjust print data beforehand so that the barcode can fit to the label.
◦ For UPC-A Composite, you can only specify 11 digits for data entry, however when 12 digits
is specified for the compatibility purpose, EAN13 Composite (CC-A/CC-B) is generated.
[Format 2]
<EU>aabbcccn...n
• Parameter
a [One-dimensional barcode type]
11 : GS1-128 Composite (CC-A/CC-B)
12 : GS1-128 Composite (CC-C)
b [Minimum bar width] = 01 to 12 dots
c [Barcode height] = 001 to 500 dots
* Specify barcode height when minimum bar width is "01".
* When specifying minimum bar width "03", Barcode height "100", Barcode height become 300 dots.
n [Print data] = Data (Up to 120 digits including 1D and 2D barcode)
Maximum number of digits that can specify by merging 1D and 2D (There is a limit for the
maximum number of digits of 1D data.)
GS1-128 (UCC/EAN128) with CC-A/B 338 digits
GS1-128 (UCC/EAN128) with CC-C 2324 digits
Maximum number of digits that can specify 1D data
GS1-128 (UCC/EAN128) with CC-A/B 48 digits
GS1-128 (UCC/EAN128) with CC-C 48 digits
◦ To specify the print of composite symbol, delimit one-dimensional data and two-dimensional
data with‘|’(7CH).
Data = One-dimensional data | Two-dimensional data
◦ Use ‘#’(23H) to specify CC-A/B (Micro RDF), FNC1 (GS) of CC-C (for PDF417) as data.
◦ 2D data for GS1-128 (UCC/EAN128) With CC-A/B can contain up to 338 digits.
◦ Barcode part of GS1-128 Composite is GS1-128 (UCC/EAN128).

SATO CL6NX Specifications

General

Flash memory	2000 MB
Storage media	Flash
Internal memory	256 MB
Built-in barcodes	Code 39, Code 93, Code-128 Codabar Library, EAN13, EAN8, GS1 DataBar, Industrial 2/5, Interleaved 2/5, Matrix 2/5
Internal storage capacity	2 GB
Cables included	AC
Maximum roll diameter	220 mm
Maximum printing width	167.5 mm
Printing media thickness	0.08 - 0.268 µm
USB port	Yes
USB connector	USB Type-A / USB Type-B
Bluetooth version	3.0
Serial interface type	RS-232C
USB 2.0 ports quantity	2
Connectivity technology	Wired & Wireless
Wi-Fi	No
Display type	LCD
Product color	Black
Display diagonal	3.5 \
Display resolution	320 x 240 pixels
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
Storage temperature (T-T)	-20 - 60 °C
Operating temperature (T-T)	0 - 40 °C
Storage relative humidity (H-H)	30 - 90 %
Operating relative humidity (H-H)	30 - 80 %
Type	POS printer
Print speed	10 ips
Print technology	Direct thermal / Thermal transfer
Maximum resolution	203 x 203 DPI

Weight and Dimensions

Depth	457 mm
Width	338 mm
Height	321 mm
Weight	20000 g