284
[Coding Example]
Error correction level: 30%, Concatenation mode: Normal, Size of one side of cell: 10
<A>
<V>100<H>200<BQ>3010,112345
<Q>2
<Z>
[Supplementary Explanation]
• Carry out XOR logic operation of all the partitioned print data of the QR code and then, specify
this operation data in hexadecimal character. This is what we call [Parity data].
• When character mode is set to other than binary mode, it is not necessary to set data number
parameter.
[Precautions during use]
• This is the command of the old specification. Recommend the use of <2D31>.
To Next Page
Loading...
