333
[Supplementary Explanation]
• If using the label smaller than the head width, use this command for specifying the label size
and adjust the start point position corresponding to the label size.
• For specifying the label size, include the size of backing paper.
(Side alignment, 8 dots/mm)
Label
80mm×100mm
100mm
800dots
1249mm
9992dots
80mm
640dots
(960dots)
167.5mm
1340dots
(2010dots)
(14988dots)
(1200dots)
1
1
Start point
Label feed
direction
Value inside ( ) is 12 dots/mm
(Center alignment, 8 dots/mm)
Label
80mm×100mm
100mm
800dots
600mm
4800dots
80mm
640dots
112mm
896dots
(1344dots)
(7200dots)
(1200dots)
1
1
Start point
Label feed
direction
Value inside ( ) is 12 dots/mm
(960dots)
Parent topic System Command
To Next Page
Loading...
