43
• Digit number of sequential number should correspond to that of font/barcode data command.
If the digit number of sequential number is larger, sequential number printing will not be
performed.
• If the print data immediately after the sequential number command <F> becomes the sequential
number invalid command, the sequential number will be invalid.
[Valid Commands]
<XU> <XS> <XM> <XB> <XL> <OA> <OB> <RD> <$=> <U>Font
<S> <M> <WB> <WL> <J> <X20> <X21> <X22> <X23> <X24>
<B> <BC> <BG> <BI> <D> <D><d> <BD> <BT> <BW> <BP>Barcode
<BF> <BS> <BL> <BL><d> <BM>
2D code <2D50> <2D51>
Parent topic Modification Command
To Next Page
Loading...
