483
•
This command cannot be specified multiple times in between <A>(start of data transmission)
through <Z>(end of data transmission).
• Contents of sequential printing or calendar cannot be written as information to the tag.
• The sent information and written information are verified before printing when information is
written to tag with this command.
• The default value of parameter b is 0 (stop without ignoring tag error).
• If printing object doesn’t exist for the print job that includes this command, printer only writes for
RFID and doesn’t feed label. The buzzer will sound 6 times if it fails to write to tag. If successful,
the buzzer is sounded 2 times but does not feed the label. If you want to feed or print as blank
label specify 1 for the “fsw: feed without printing” field.
• Refer to the following chart if you want to specify the alphabet “A” in ASCII/HEX data formats.
Mode ASCII HEX
Data 'A' "41"
Code 41H 34H,31H
Parent topic RFID Command (CL4NX Only)
To Next Page
Loading...
