604
[Return data format (normal, data exists)]
[STX]a...a,b...b(,c...c)[ETX]
Data example) [STX]xxxx,SBPL_001.dfl, SBPL_002.dfl[ETX]
Symbol Parameter name Valid range
a Total number of data byte
* This is the total number of bytes after parameter b. The
delimiting comma between parameters a and b, and the
ETX are not included.
Data size from the first identifier until
before [ETX]
b(c) File name
[Return data format (normal, no file)]
[STX]0[ETX]
[Return data format (when a command error occurs)]
[NAK]<15>
16
[Exception processing]
Exception conditionParameter name
A value outside the
range is specified
The specified size and
received size are different
Language Command error Command error
File type Command error Invalid receive data
Conditions Exception condition
When directory of the specified parameter does not
exist. (Condition: Never registered in the past and so
on.)
Command error
Terminology Description
Command error The file name list is not returned. The data received after a command error is
determined is not considered as a parameter of this command.
Invalid receive data The subsequent data is ignored.
[Supplemental explanation]
• Send this command when printing has stopped. The content of the response data is not
guaranteed even when this command is received during printing.
• When you specify SZPL for "Parameter a: Language", "0: Font/logo", "1: TrueType font" settings
of "Parameter b: File type" will be ignored. So all file names registered with SZPL will return.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
