607
[Return data format (normal, data exists)]
[STX]a...a,b...b[ETX]
Symbol Parameter name Valid range
a Total number of data byte
* This is the total number of bytes after parameter b.
The delimiting comma between parameters a and b,
and the ETX are not included.
Data size from the first identifier until before
[ETX]
d File data
[Return data format (normal, no data)]
[STX]0[ETX]
[Return data format (when a command error occurs)]
[NAK]<15>
16
[Exception processing]
Exception conditionParameter name
A value outside
the range
is specified
The specified size and received size are different
Language Command error Invalid receive data
File type Command error Command error
File name size Command error Excessively small: Command error, Excessively large:
Remaining data standby
File name Command error Excessively small: Remaining data standby, Excessively large:
Command error
Terminology Description
Command error The file name list is not returned. The data received after a command error is
determined is not considered as a parameter of this command.
Invalid receive data The subsequent data is ignored.
[Supplemental explanation]
• When a file name is bigger than the size of the file name and still the file name is valid, it
operates and finishes normally.
• When you specify SZPL for "Parameter a: Language", "0:Font/logo", "1:TrueType font" settings
of "Parameter b: File type" will be ignored.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
