629
Description ASCII HEX
PRINT HALT (NO ERROR)
*1
W 57
(UNUSED) BATTERY NEAR END - 2D
(UNUSED) BATTERY NEAR END & RIBBON NEAR
END
. 2E
(UNUSED) BATTERY NEAR END & BUFFER NEAR
FULL
/ 2F
(UNUSED) BATTERY NEAR END & RIBBON NEAR
END & BUFFER NEAR FULL
@ 40
HEAD OPEN b 62
PAPER END c 63
RIBBON END d 64
MEDIA ERROR e 65
SENSOR ERROR f 66
BARCODE READ / MATCHING ERROR f 66
BARCODE READER CONNECTION CHECK ERROR f 66
HEAD ERROR g 67
(UNUSED) COVER OPEN h 68
CUTTER OPEN ERROR h 68
(UNUSED) RIBBON CORE NON LOCK ERROR h 68
CARD ERROR i 69
CUTTER ERROR j 6A
OTHER ERRORS k 6B
(UNUSED) CUTTER SENSOR ERROR l 6C
(UNUSED) STACKER or REWINDER FULL WINDER FULL m 6D
RFID TAG ERROR o 6F
RFID PROTECT ERROR p 70
ERROR
DETECTION
(UNUSED) BATTERY ERROR q 71
*1 Depending on the timing of analysis/editing, print quantity will not be set up properly.
*2 Buffer over may occur depending on interface.
RS-232C USB LAN WLAN Bluetooth IEEE1284
○ x x x x x
[○：
Interface with buffer over,
×：
Interface which doesn’t have buffer over]
• The root cause of receive buffer near full
"Receive buffer near full" occurs when the buffer's free space goes down to 0.95 MB out of the
2.95 MB of receive buffer.
• The root cause of cancellation of receive buffer near full
"Receive buffer near full" is cleared when the buffer's free space decreased to 1.95 MB.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
