SATO CL6NX - Page 70

68
• There are cases where the rendered field may run off from printing area depending on
"Alignment position" and print position commands <H> and <V>. Command error (Position
Error) may occur depending on the conditions as described below.
ABC
5
The characters will not be printed
because it runs over from printable
range.
ABC
8
ABC
5
In this case, command error will
not occur but the characters that
run over from printable range
will be missing.
ABC
6
• The composition of the field depends on the command when specifying "Alignment position" for
barcode and 2D code fields.
Ex.) When specifying barcode, 2D code without automatically attached human readables
4
7
1
6
3
9
5
2
8
4
7
1
6
3
9
5
2
8
4
7
1
6
3
9
5
2
8
4
7
1
6
3
9
5
2
8
Ex.) When specifying a barcode with automatically attached human readables (<BD>,<BM>
<BI> etc.)
4
7
1
6
3
9
5
2
8
4
7
1
6
3
9
5
2
8
4
7
1
6
3
9
5
2
8
• The left alignment position in the top, middle, and bottom differs for barcodes such as UPC-A
and JAN/EAN-13 with <BD> / <BM> command since the human readable text is printed in the
left of the barcode.