SATO CL6NX Programming Reference

707
CL4NX
Trap
Printer MIB Host Resources MIB
# Alert Description
prtAlertSeveri
tyLevel
prtAlertTraini
ngLevel
prtAlertGroup prtAlertCode
hrPrinterDete
ctedErrorStat
e
hrDeviceStat
us
hrPrinter
Status
90 guiWarning_paperNearEnd Paper near end X warning(4) untrained(3) input(8)
inputMediaSupp
lyLow(807)
bit #0
(lowPaper)
91
guiWarning_receiveBufferNea
rFull
Receive buffer near full X warning(4) other(1) channel(14) other(1) -
92 guiWarning_ribbonNearEnd Ribbon near end X warning(4) untrained(3)
markerSupplies
(11)
markerPrintRib
bonAlmostEmpty
(1106)
bit #2
(lowToner)
93 guiWarning_unknownHead Unknown head X warning(4)
fieldService(5
)
marker(10) other(1) -
94 mStatus_error Offline and error X critical(3) untrained(3)
generalPrinter
(5)
subunitOffline
(22)
bit #6
(offline) |
bit #7
(serviceReque
sted) down(5) other(1)
95 mStatus_online|mStatus_aep Online - - - - - - running(2) /
warning(3) *
idle(3) /
printing(
4) **
96 mStatus_offline Offline X critical(3) untrained(3)
generalPrinter
(5)
subunitOffline
(22)
bit #6
(offline) down(5) other(1)
97 mStatus_powerDown Power down - - - - - -
down(5) other(1)
98 mStatus_init Initializing - - - - - -
down(5) warmup(5)
99 mStatus_upgrading Upgrading - - - - - -
down(5) other(1)
100 mStatus_powersave Power Saving Mode - - - - - -
running(2)|w
arning(3)|do
wn(5) *** other(1)
101 mStatus_wakeup Waking up from Power Saving Mode - - - - - -
running(2)|w
arning(3)|do
wn(5) *** warmup(5)
* warning(3) is set in case of an active warning (guiWarning_xxx), else running(2) is set.
** printing(4) is set while printing a label, else idle(3) is set.
*** running(2) or warning(3) is set (see *) if the printer will wake up to the online state (mStatus_online), else down(5) is set.

SATO CL6NX Specifications

General

Flash memory	2000 MB
Storage media	Flash
Internal memory	256 MB
Built-in barcodes	Code 39, Code 93, Code-128 Codabar Library, EAN13, EAN8, GS1 DataBar, Industrial 2/5, Interleaved 2/5, Matrix 2/5
Internal storage capacity	2 GB
Cables included	AC
Maximum roll diameter	220 mm
Maximum printing width	167.5 mm
Printing media thickness	0.08 - 0.268 µm
USB port	Yes
USB connector	USB Type-A / USB Type-B
Bluetooth version	3.0
Serial interface type	RS-232C
USB 2.0 ports quantity	2
Connectivity technology	Wired & Wireless
Wi-Fi	No
Display type	LCD
Product color	Black
Display diagonal	3.5 \
Display resolution	320 x 240 pixels
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
Storage temperature (T-T)	-20 - 60 °C
Operating temperature (T-T)	0 - 40 °C
Storage relative humidity (H-H)	30 - 90 %
Operating relative humidity (H-H)	30 - 80 %
Type	POS printer
Print speed	10 ips
Print technology	Direct thermal / Thermal transfer
Maximum resolution	203 x 203 DPI

Weight and Dimensions

Depth	457 mm
Width	338 mm
Height	321 mm
Weight	20000 g