Section 05 ENGINE (4-TEC)
Subsection 02 (INTAKE SYSTEM)
Pull the connectors for KS, CPS and magne-
to out of the ECM support. Refer to WIRING
DIAGRAMS section. Disconnect KS and CPS
connectors.
Cut locking ties as necessary and pull wiring har-
ness away from intake manifold.
4-TEC NA Engines
Slacken air intake silencer collar.
Unlock throttle cable housing from throttle body.
Cable is to be detached later on.
R1503motr72A
1
2
1. Air intake silencer collar
2. Unlock throttle cable housing
4-TEC Supercharged Engines
Remove inlet hose from throttle body.
Disconnect throttle cable from throttle body.
R1503motr252A
21
1. Detach hose
2. Disconnect cable
4-TEC Supercharged Intercooled Engines
Remove the hoses connected to the intercooler.
1
R1503motr361A
2
1. Hose from intercooler to exhaust manifold (outlet nipple)
2. Hose from jet pump
All 4-TEC Engines
Remove manifold retaining screws and push the
oil dipstick tube out of the manifold slot.
R1503motr59A
Lift intake manifold up to pull it out of the mounting
brackets just enough to reach throttle cable end.
196 smr2004-Complete Line Up
To Next Page
Loading...
