SeaDoo GTI - General; Glove Box

Section 16 HULL/BODY
Subsection 01 (ADJUSTMENT AND REPAIR)
GENERAL
Verify hinges condition and latching mechanisms
condition and operation. Replace any damaged
components.
GTX 4-TEC Series and RXP 4-TEC Models
When applying threadlocker Loctite products
(anaerobic products), pay attention so that it does
not come in contact with ABS plastic parts (paint-
ed parts). It could lead to plastic cracks or other
damage.
GLOVE BOX
Removal
GTX 4-TEC Series
Lift the glove box top cover
Gently push on both rear tabs while lifting out rear
of glove box compartment.
F18L3MA
1
1. Push tabs
Pull the glove box out of body.
GTI Series
Remove handle from shift lever.
1
F16L07A
1. Unscrew
Remove darts and then remove side panels.
1
F16L08A
1. Unscrew the darts
smr2004-Complete Line Up 733
www.SeaDooManuals.net