SeaDoo GTI User Manual

Section 01 SERVICE TOOLS AND PRODUCTS
Subsection 01 (MANDATORY SERVICE TOOLS )
Coolant pump seal pusher
(P/N 529 035 823)
APPLICATION
4-TEC engines.
PROPULSION SYSTEM
N–>
Impeller remover/installer
a. (P/N 295 000 001)
b. (P/N 529 035 820)
c. (P/N 529 035 956)
APPLICATION
a. All 2-stroke models.
b. GTX 4-TEC engines.
c. RXP 4-TEC engines.
NOTE: This tool is also used
for the PTO flywheel (on some
models).
Pliers
(P/N 295 000 069)
APPLICATION
All models.
Impeller shaft holder
(P/N 295 000 082)
APPLICATION
All 2-stroke models.
Jet pump bearing remover
(P/N 295 000 144)
APPLICATION
All 2-stroke models.
Bearing/seal installer
(P/N 295 000 107)
APPLICATION
All 2-stroke models.
Inner seal installer
(P/N 529 035 609)
APPLICATION
155.6 mm (6-1/8 in) jet pump.
Impeller shaft guide
(P/N 295 000 002)
APPLICATION
All 2-stroke models.
6 smr2004-Complete Line Up
www.SeaDooManuals.net

SeaDoo GTI Specifications

General

Seating Capacity	3
Manufacturer	Sea-Doo
Fuel Type	Gasoline
Fuel Capacity	15.9 gallons
Type	Recreational