Section 16 HULL/BODY
Subsection 01 (ADJUSTMENT AND REPAIR)
F19L17A
RELEASE SIDE MOLDED PART FROM GLOVE BOX
Slightly lift glove box to free it.
Proceedwiththeothersidethesamewaytofi-
nally pull glove box out.
Installation
Reverse the removal procedure.
ENGINE COVER
RXP 4-TEC Models
Remove seat.
Detach coolant expansion tank and move away.
F19L1BA
1
1. Coolant expansion tank
Remove Bombardier logo at rear.
F19L1AA
1
1. Logo
Remove retaining screws.
1
F19L1CA
1. Retaining screws
smr2004-Complete Line Up 735
To Next Page
Loading...
