Section 05 ENGINE (4-TEC)
Subsection 02 (INTAKE SYSTEM)
R1503motr362A
1
2
3
1. Intercooler
2. O-Ring
3. Collar
Supercharger
4-TEC Supercharged Engines
Take apart supercharger housing.
1
F00B28A
3
2
1
1 1
1. Retaining screws
2. Housing half (intake side)
3. Housing half (engine side)
F00B29A
PLASTIC HAMMER
NOTE: The cap nut on the supercharger shaft has
LH threads.
Loosen cap nut (turn clockwise) on supercharger
shaft turbine side while holding shaft with a retain-
ing key (P/N 529 035 949).
1
R1503motr228A
1. Cap nut
Remove washer, turbine, O-ring and step collar
from supercharger shaft.
smr2004-Complete Line Up 199
To Next Page
Loading...
