Section 11 LUBRICATION SYSTEM (2-STROKE)
Subsection 02 (OIL INJECTION PUMP)
CAUTION: Proper oil injection pump adjust-
ment is very important. Any delay in the
opening of pump can result in serious engine
damage.
Bleeding
CAUTION: Oil injection system must be bled
and adjustment checked before operating en-
gine.
Ensure oil injection reservoir is sufficiently filled.
Install a dry rag below oil injection pump.
Loosen bleed screw to allow oil to flow.
1
F01D4SC
717 ENGINES
1. Bleed screw
F07G02A
1
787 RFI ENGINES
1. Bleed screw
1
F16G02A
947 DI ENGINES
1. Bleed screw
Keep bleeding until all air has escaped from line.
Make sure no air bubbles remain in oil supply line.
Tighten bleed screw.
Wipe any oil spillage.
Check small oil lines of the pump. They must be
full of oil.
1
2
F07G06A
1. Lines must be full of oil
2. Oil pump
If not, proceed as follows.
540 smr2004-Complete Line Up
To Next Page
Loading...
Need help?
General
