Issue 01/06 Parameter Description
MICROMASTER 440 Parameter List
6SE6400-5BB00-0BP0
113
3.17 Fixed frequencies
P1001[3] Fixed frequency 1 Min: -650.00
CStat: CUT Datatype: Float Unit: Hz Def: 0.00
P-Group: SETPOINT Active: Immediately QuickComm.: No Max: 650.00
Defines fixed frequency setpoint 1.
There are three options available for selection of the fixed frequencies:
1. Direct selection
2. Direct selection + ON command
3. Binary coded selection + ON command
1. Direct selection (P0701 - P0706 = 15):
- In this mode of operation 1 digital input selects 1 fixed frequency.
- If several inputs are active together, the selected frequencies are summed.
- E.g.: FF1 + FF2 + FF3 + FF4 + FF5 + FF6.
2. Direct selection + ON command (P0701 - P0706 = 16):
- The fixed frequency selection combines the fixed frequencies with an ON command.
- In this mode of operation 1 digital input selects 1 fixed frequency.
- If several inputs are active together, the selected frequencies are summed.
- E.g.: FF1 + FF2 + FF3 + FF4 + FF5 + FF6.
3. Binary coded selection + ON command (P0701 - P0706 = 17):
- Up to 16 fixed frequencies can be selected using this method.
- The fixed frequencies are selected according to the following table:
Index:
P1001[0] : 1st. Drive data set (DDS)
P1001[1] : 2nd. Drive data set (DDS)
P1001[2] : 3rd. Drive data set (DDS)
Example:
DIN4 DIN3 DIN2 DIN1
FF0
P1001 FF1
0 Hz 0 0 0 0
0001
001 0
0011
0 1 00
0 1 0 1
0 110
0 111
1 000
1 001
1 0 1 0
1 0 11
1100
110 1
1110
P1002 FF2
P1003 FF3
P1004 FF4
P1005 FF5
P1006 FF6
P1007 FF7
P1008 FF8
P1010
FF9
P1011
FF10
P1012
FF11
P1013
FF12
P1014
FF13
P1015
FF14
P1009
FF15
1111
Binary coded selection :
Level
2
To Next Page
Loading...
