Siemens MICROMASTER 440 - Status Word: Flying Start V;F; Status Word: Flying Start SLVC

To Next Page

To Previous Page

Parameter Description Issue 01/06

MICROMASTER 440 Parameter List

138 6SE6400-5BB00-0BP0

r1204 Status word: Flying start V/f Min: -

Datatype: U16 Unit: - Def: -

P-Group: FUNC Max: -

Bit parameter for checking and monitoring states during search, if V/f control mode is selected (see P1300).

Bitfields:

Bit00 Current applied 0 NO 1 YES

Bit01 Current could not be applied 0 NO 1 YES

Bit02 Voltage reduced 0 NO 1 YES

Bit03 Slope-filter started 0 NO 1 YES

Bit04 Current less threshold 0 NO 1 YES

Bit05 Current-minimum 0 NO 1 YES

Bit07 Speed could not be found 0 NO 1 YES

r1205 Status word: Flying start SLVC Min: -

Datatype: U16 Unit: - Def: -

P-Group: FUNC Max: -

Bit parameter for checking status of flying start performed with n-adaption of observer. Parameter is only

valid, if sensorless vector control (SLVC) is selected (see P1300).

Bitfields:

Bit00 Transformation active 0 NO 1 YES

Bit01 Initialize n-adaption 0 NO 1 YES

Bit02 Current applying 0 NO 1 YES

Bit03 N-controller closed 0 NO 1 YES

Bit04 Isd-controller open 0 NO 1 YES

Bit05 RFG hold 0 NO 1 YES

Bit06 N-adaption set to zero 0 NO 1 YES

Bit07 Reserved 0 NO 1 YES

Bit08 Reserved 0 NO 1 YES

Bit09 Reserved 0 NO 1 YES

Bit10 Direction Positive 0 NO 1 YES

Bit11 Search is started 0 NO 1 YES

Bit12 Current is applied 0 NO 1 YES

Bit13 Search is aborted 0 NO 1 YES

Bit14 Deviation is zero 0 NO 1 YES

Bit15 N-controller is active 0 NO 1 YES

Level

www . ElectricalPartManuals . com

Other manuals for Siemens MICROMASTER 440