Siemens MICROMASTER 440 Parameter Guide

Available Documentation for the MICROMASTER 440
Getting Started Guide
Is for quick commissioning with SDP and BOP.
Operating Instructions
Gives information about features of the MICROMASTER
440, Installation, Commissioning, Control modes, System
Parameter structure, Troubleshooting, Specifications and
available options of the MICROMASTER 440.
Parameter List
The Parameter List contains the description of all
Parameters structured in functional order and a detailed
description. The Parameter list also includes a series of
function plans.
Catalogues
In the catalogue you will find all needs to select a certain
inverter, as well as filters chokes, operator panels or
communications options.
www . ElectricalPartManuals . com

Siemens MICROMASTER 440 Specifications

General

Power Range	0.12 kW to 250 kW
Output Voltage	0 V to Input Voltage
Output Frequency	0 Hz to 650 Hz
Control Modes	Vector control
Overload Capability	150% for 60 seconds
Protection Features	Overvoltage, Undervoltage, Overcurrent, Overtemperature, Short Circuit, Ground Fault
Communication Interfaces	PROFIBUS, DeviceNet, CANopen, Modbus RTU
Enclosure Rating	IP20
Ambient Temperature	-10°C to +50°C
Input Voltage	200 V to 240 V (±10%), 380 V to 480 V (±10%)