EasyManua.ls Logo

Siemens MICROMASTER 440 - Hysteresis Freq. for Overfreq.; Entry Freq. for Perm. Deviation; Hysteresis Frequency Deviation; Delay Time Permitted Deviation

Siemens MICROMASTER 440
328 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Issue 01/06 Parameter Description
MICROMASTER 440 Parameter List
6SE6400-5BB00-0BP0
213
P2162[3] Hysteresis freq. for overfreq. Min: 0.00
CStat: CUT Datatype: Float Unit: Hz Def: 20.00
P-Group: ALARMS Active: Immediately QuickComm.: No Max: 650.00
Hysteresis frequency for overfrequency-detection as illustrated in the diagram below.
0
1
{
Max. frequency
0.00 ... 650.00 [Hz]
P1082.D (50.00)
Overspd. hyst.freq
0.00 ... 650.00 [Hz ]
P2162.D (20.00)
f_act > f_max
f_act
f_act > f_max
r2197 Bit06
Index:
P2162[0] : 1st. Drive data set (DDS)
P2162[1] : 2nd. Drive data set (DDS)
P2162[2] : 3rd. Drive data set (DDS)
P2163[3] Entry freq. for perm. deviation Min: 0.00
CStat: CUT Datatype: Float Unit: Hz Def: 3.00
P-Group: ALARMS Active: Immediately QuickComm.: No Max: 20.00
Threshold for detecting frequency deviation from setpoint as illustrated in the diagram P2164.
Index:
P2163[0] : 1st. Drive data set (DDS)
P2163[1] : 2nd. Drive data set (DDS)
P2163[2] : 3rd. Drive data set (DDS)
P2164[3] Hysteresis frequency deviation Min: 0.00
CStat: CUT Datatype: Float Unit: Hz Def: 3.00
P-Group: ALARMS Active: Immediately QuickComm.: No Max: 10.00
Hysteresis frequency for detecting permitted deviation (from setpoint). This frequency controls bit 8 in status
word 1 (r0052) and bit 6 in status word 2 (r0053).
–
+
0
1
{
Entry freq . deviat
0.00 ... 20.00 [Hz]
P2163.D (3.00)
Delay_T perm. dev.
0 ... 10000 [ms]
P2165.D (10)
Hyster freq deviat
0.00 ... 10.00 [Hz ]
P2 164. D ( 3. 00)
f_act
f_act == f_set
f_set
f_act == f_set
0T
r2197 Bit07
r0052 Bit08
r0053 Bit06
Index:
P2164[0] : 1st. Drive data set (DDS)
P2164[1] : 2nd. Drive data set (DDS)
P2164[2] : 3rd. Drive data set (DDS)
P2165[3] Delay time permitted deviation Min: 0
CStat: CUT Datatype: U16 Unit: ms Def: 10
P-Group: ALARMS Active: Immediately QuickComm.: No Max: 10000
Delay time for detecting permitted deviation of frequency from setpoint.
Index:
P2165[0] : 1st. Drive data set (DDS)
P2165[1] : 2nd. Drive data set (DDS)
P2165[2] : 3rd. Drive data set (DDS)
Details:
See diagram in P2164.
Level
2
Level
2
Level
3
Level
2
www . ElectricalPartManuals . com

Table of Contents

Other manuals for Siemens MICROMASTER 440

Related product manuals