Siemens SIMATIC S7-1200 - Page 1015

Web server
12.6 Standard Web pages
S7-1200 Programmable controller
System Manual, V4.2, 09/2016, A5E02486680-AK
1015
To perform certain actions such as changing the operating mode of the controller, writing
values to memory, and updating the CPU firmware you must have the required privileges.
Note that if you have set the protection level of the CPU (Page 210) to "Complete protection
(no access)", then the "Everybody" user has no permission to access the Web server,
regardless of the Web server user permission settings.
The log in
frame is near the upper left corner on
each standard Web page when displayed from a
PC or a wide mobile device.
The Log In page is a separate page on small m
o-
bile devices that display the basic pages. It is s
e-
lectable from the Home
page.
To log in, follow these steps:
1. Enter the user name for the Username field.
2. Enter the user password in the Password field.
Your login times out after thirty minutes of inactivity. If the currently-loaded page is
continually refreshing, the login does not time out.
Note
If you encounter any problems logging in,
download the Siemens security certificate
(Page
1085) from the Introduction page (Page 1017). You can then log in with no errors.