Siemens SIMATIC S7-1200

Technical specifications
A.14 Analog signal boards (SBs)
S7-1200 Programmable controller
1514 System Manual, V4.2, 09/2016, A5E02486680-AK
A.14.2
SB 1232 1 analog output specifications
Table A- 211 General specifications
Technical data
SB 1232 AQ 1 x 12 bit
Article number
6ES7232-4HA30-0XB0
Dimensions W x H x D (mm) 38 x 62 x 21
Weight
40 grams
Power dissipation 1.5 W
Current consumption (SM Bus)
15 mA
Current consumption (24 V DC)
40 mA (no load)
Table A- 212 Analog outputs
Technical data
SB 1232 AQ 1 x 12 bit
Number of outputs
1
Type
Voltage or current
Range
±10 V or 0 to 20 mA
Resolution Voltage: 12 bits
Current: 11 bits
Full scale range (data word)
Refer to the output ranges for voltage and current
(Page 1517).
Voltage: -27648 to 27648
Current: 0 to 27648
Accuracy (25 °C / -20 to 60 °C)
±0.5% / ±1% of full scale
Settling time (95% of new value) Voltage: 300 μs (R), 750 μs (1 uF)
Current: 600 μs (1 mH), 2 ms (10 mH)
Load impedance Voltage: ≥ 1000 Ω
Current: ≤ 600 Ω
Behavior on RUN to STOP
Last value or substitute value (default value 0)
Isolation (field side to logic)
None
Cable length (meters) 100 m, twisted and shielded
Table A- 213 Diagnostics
Technical data
SB 1232 AQ 1 x 12 bit
Overflow/underflow
Yes
Short to ground (voltage mode only)
Yes
Wire break (current mode only)
Yes