Siemens SIMATIC S7-1200

Online and diagnostic tools
15.4 Setting the IP address and time of day
S7-1200 Programmable controller
1316 System Manual, V4.2, 09/2016, A5E02486680-AK
15.4
Setting the IP address and time of day
You can set the
IP address (Page 813) and time of day in the online CPU. After accessing
"Online & diagnostics" from the Project tree for an online CPU, you can display or change
the IP address. You can also display or set the time and date parameters of the online CPU.
Note
This feature is available only for a CPU that either has only a MAC address (has not yet
been assigned an IP address) or has been reset to factory settings.