Siemens SIMATIC S7-1200

Device configuration
6.1 Inserting a CPU
S7-1200 Programmable controller
154 System Manual, V4.2, 09/2016, A5E02486680-AK
6.1
Inserting a CPU
You can insert a CPU into your pr
o-
ject from either the Portal view or the
Project view of STEP
7:
•
In the Porta
l view, select "Devices
& Networks" and click "Add new
device".
•
In the Project view, under the
project name, double-click "Add
new device".
Be sure you insert the correct model and firmware version from the list. Selecting the CPU
from the "Add new device" dialog creates the rack and CPU.
Note
With STEP
7 V14, you cannot add a V1.0 S7-1200 CPU to your project.