EasyManua.ls Logo

Siemens SIMATIC S7-1200

Siemens SIMATIC S7-1200
1614 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Web server
12.3 Accessing the Web pages from a PC
S7-1200 Programmable controller
System Manual, V4.2, 09/2016, A5E02486680-AK
1007
12.3
Accessing the Web pages from a PC
You can access the S7-1200 standard Web pages from a PC or from a mobile device
through the IP address of the S7-1200 CPU or the IP address of any Web server-enabled
CP (Page 1010) in the local rack.
To access the S7-1200 standard Web pages from a PC, follow these steps:
1. Ensure that the S7-1200 and the PC are on a common Ethernet network or are
connected directly to each other with a standard Ethernet cable.
2. Open a Web browser and enter the URL "https://ww.xx.yy.zz", where "ww.xx.yy.zz"
corresponds to the IP address of the S7-1200 CPU or the IP address of a CP in the local
rack.
The Web browser opens the Introduction standard Web page (Page 1017) or the Default
HTML page of your user-defined Web pages if you configured it to be the entry page
(Page 1058).
Note
Use a secure Virtual Private Network (VPN) to connect to the S7
-
1200 PLC Web server from
a location outside your protected network. Be aware also of any
constraints (Page 1082
) that
your Web environment or operating system might impose.
Alternatively, you can address your Web browser to a specific standard Web page. To do so,
enter the URL in the form "https://ww.xx.yy.zz/<page>.html", where <page> corresponds to
one of the standard Web pages:
start (Page 1018) - general information about the CPU
identification (Page 1019) - detailed information about the CPU including serial, order,
and version numbers, now called the Diagnostics page
module (Page 1023) - information about the modules in the local rack and the ability to
update firmware
communication (Page 1027) - information about the network addresses, physical
properties of the communication interfaces, and communication statistics
diagnostic (Page 1022) - the diagnostic buffer
variable (Page 1031) - CPU variables (tags) and I/O, accessible by address, PLC tag
name, or data block tag name
watch (Page 1033) - watch tables
filebrowser (Page 1037) - browser for accessing data log files or recipe files stored
internally in the CPU or on a memory card
index (Page 1017) - introduction page to enter the standard Web pages
login (Page 1013) - page to log in if no user is currently logged in; otherwise, the page is
blank.

Table of Contents

Other manuals for Siemens SIMATIC S7-1200

Related product manuals