Device exchange and spare parts compatibility
D.2 S7-1200 V3.0 and earlier terminal block spare kits
S7-1200 Programmable controller
System Manual, V4.2, 09/2016, A5E02486680-AK
1577
If you have already performed the device exchange, you must remove the 100-byte reserve
from each block individually:
1. From the project tree, right-click a data block from the Program blocks folder and select
Properties from the shortcut menu.
2. In the Data block properties dialog, select the "Download without reinitialization" node.
3. Set the memory reserve to 0 bytes.
4. Repeat for each data block in your project.
Note
Projects for V4.0 and V4.1 CPUs can run without modification in V4.2 CPUs.
To Next Page
Loading...
