Siemens SIMATIC S7-1200 - Page 301

Basic instructions
8.7 Conversion operations
S7-1200 Programmable controller
System Manual, V4.2, 09/2016, A5E02486680-AK
301
Table 8- 128 Error output codes for the DB_ANY_TO_VARIANT instruction
Err
(W#16#...)
Description
0000
No error
8130 The number of the data block is 0.
8131
The data block does not exist or is too short.
8132
The data block is too short and not an Array data block.
8134
The data block is write-protected.
8154
The data block has the incorrect data type.
8155
Unknown type code
*You can display error codes in the program editor as integer or hexadecimal values.