Siemens SIMATIC S7-1200 - Page 513

Extended instructions
9.9 Recipes and Data logs
S7-1200 Programmable controller
System Manual, V4.2, 09/2016, A5E02486680-AK
513
Table 9- 202 Values of ERROR and STATUS
ERROR
STATUS
(W#16#....)
Description
0
0000
No error
0 7000 Call with no REQ edge: BUSY = 0, DONE = 0
0
7001
First call with REQ edge (working): BUSY = 1, DONE = 0
0
7002
N
th
call (working): BUSY = 1, DONE = 0
1
8070
All internal instance memory is in use.
1
807F
Internal error
1
8090
Invalid file name
1
8091
Name parameter is not a String reference.
1 8093
A data log already exists with that name. Use a different name, make sure the existing
data log's .csv file is not open, and then use the File Browser (Page 1037) page of the
Web Server to delete the existing data log.
1
8097
Requested file length exceeds file system maximum.
1 80B2 Out of resource IDs
Note: Delete some existing data logs or decrease the number of columns in the data
record structure to avoid this error.
1
80B3
Insufficient load memory available.
1
80B4
MC (memory card) is write-protected.
1
80C0
Archive file is locked
1
80C1
Too many open files: No more than eight opened data log files are allowed.
1
8253
Invalid record count
1
8353
Invalid format selection
1
8453
Invalid timestamp selection
1 8B24 Invalid HEADER area assignment: For example, pointing to local memory
1
8B51
Invalid HEADER parameter data type
1 8B52 Too many HEADER parameter data elements
1
8C24
Invalid DATA area assignment: For example, pointing to local memory
1
8C51
Invalid DATA parameter data type
1
8C52
Too many DATA parameter data elements