Extended instructions
9.9 Recipes and Data logs
S7-1200 Programmable controller
532 System Manual, V4.2, 09/2016, A5E02486680-AK
The ID parameter is an IN/OUT type. First, you supply the ID value of the existing
Data log whose structure you want to copy. After the DataLogNewFile operation is complete,
a new and unique ID value for the new Data log is written back to the ID reference location.
The required DONE bit = TRUE capture is not shown, refer to networks 1, 2, and 4 for an
example of DONE bit logic.
Data log files created by the example program viewed with the S7-1200 CPU Web server
The "Delete" option is not available if you are not logged in with modify privileges.
The "Rename" option is not available if you are not logged in with modify privileges.
To Next Page
Loading...
