Siemens SIMATIC S7-1200 - Page 629

Technology instructions
10.2 PID control
S7-1200 Programmable controller
System Manual, V4.2, 09/2016, A5E02486680-AK
629
Setting
TO-DB parameter
Data
type
Value range
Description
Selection
Output
(cooling)
"Config.Output.Cool.Select" Int
(Enu
m)
2 >= Config.Output.
Heat.Select
>= 0
Selects which kind of
output to use for cooling.
Possible selections:
• “OutputCool” (Real)
• “OutputCool_PWM”
(Bool) (=default)
• “OutputCool_PER
(analog)” (Word)
Only available if you
check “Activate output
(cooling)”;
(Config.ActivateCooling
= TRUE).
Output
(cooling)
OutputCool, OutputCool_PER,
or OutputCool_PWM
Real
or Int
or
Bool
Real, Int, or Bool Only accessible in Prop-
erties page.
No multi value control in
online mode of function-
al view.