Technology instructions
10.3 Motion control
S7-1200 Programmable controller
728 System Manual, V4.2, 09/2016, A5E02486680-AK
Example: Selecting the active reference point switch level
1. You have configured an S7-1200 project with an Analog/PROFIdrive axis using active
homing. Depending on your application, you select "High level" or "Low level" for the
active homing switch level:
2. The program executes an active homing.
3. After finishing the active homing, the axis is homed.
To Next Page
Loading...
